Saniswift Pro
Residential/Commercial Heavy-Duty Gray Water Drain Pump - 1/3HP - Easy Laundry Room Solution - Laundry/Sink/Shower - HDPE Easy Access - Low inlets
• Residential and commercial drain pump for indoor and outdoor area
• ↑ 14 Ft ↑ and/or ← 140 Ft →
• Capable of discharging up to 24 GPM
• Handle solids up to 3/8”
• Inlets: two 2” and one 1-1/2”
• Discharge: 1-1/2” or 1-1/4” + vent
• Low inlets for easy installation
• Powerful, economical and compact design
• Silent (44 dBa)
• Certifications: CSA (IPC, NSPC), IAPMO (UPC)
• 4 Years limited warranty
The IAPMO listed Saniswift Pro drain pump is used to pump gray water away from a variety of both residential and commercial applications. The system is able to discharge the waste up to 14 feet vertical and/or 140 feet horizontal. This model is powerful and economical with a compact design and one 1.5" top...
See more
Saniswift Pro Data sheet
Dimensions (Height x Width x Depth):
9-3/4" x 12-1/4" x 11 1/4"
Technical features of Saniswift Pro | |
---|---|
Part number | 022 |
Max. horizontal discharge | 14 ft |
Max. vertical discharge | 140 ft |
Voltage | 120 V |
Frequency | 60 Hz |
Amperage | 4.5 Amps (Max) |
Motor | 0.3 HP oil-filled thermally protected motor |
Capacitor rating | 30 microfarad |
Operating temperature | 140°F |
Power cord length | 48 inches |
Noise level (measured at 3 ft.) | ≤ 44 dBA (Lp) |
Discharge pipe diameter | 1” - 1–1/2” |
Discharge rate at 15 ft | @14 Ft : 18 GPM |
Discharge rate at 3 ft | 24 GPM |
Shut-off head | 25 ft |
Normal running time | 3-5 seconds (Short bursts) |
Capacity | 2.9 gallons / 11 liters |
Inlets diameters | 2” (sides) |
Ventilation diameter | 1-1/2"vent (top) |
Type of activation | Pressure switch/ circuit board |
Shower/bath base height | 6" min |
Weight | 16 lbs / 7.3 kg |
Certifying agencies | CSA (IPC, NSPC), IAPMO (UPC) |