Sanipit® 24 GR CB

Sanipit® 24 GR CB

The Sanipit® 24 GR CB is a pre-assembled packaged 24” x 24” grinding 1 HP pump system w/ basin and control panel/alarm system.  

    Powerful 1 HP motor equipped with stainless steel grinder blade meant for residential & commercial applications.

      Capable of discharging up to 66GPM through a 2” discharge + vent

        Capable of pumping up to 25 Ft (Max. Shut-off head: 33 Ft).

          Inlet: 4” 

            Dry cavity and Easy access to all major internal components, including motor, grinder blade, and pressure switches.

              Rated IP68 with external control panel and visual/audible alarm system.

                Equipped with a fail-proof air pressure switch system with triple redundancy.

                  Certifications: CSA (IPC, NSPC)

                    4 Years limited warranty 

                    $0.00

                    Technical data sheet

                    Sanipit® 24 GR CB
                    Part number 054
                    Max. horizontal discharge 328 ft
                    Max. vertical discharge 25 ft
                    Voltage 120 V
                    Frequency 60 Hz
                    Amperage 10 Amps (Max)
                    Motor 1 HP oil-filled thermally protected motor
                    Capacitor rating 60 microfarad
                    Operating temperature 158°F
                    Power cord length 32 inches
                    Noise level (measured at 3 ft.) ≤ 68 dBA (Lp)
                    Discharge pipe diameter 2"
                    Discharge rate at 3 ft 68 GPM
                    Shut-off head 33 ft.
                    Normal running time Depends on number of fixtures
                    Capacity 41gallons / 32.2 liters
                    Inlets diameters 4" (side)
                    Ventilation diameter 2" vent (top)
                    Type of activation Pressure switches, Circuit board
                    Weight 66 lbs / 30 kg
                    Certifying agencies CSA (IPC, NSPC)